How to Build Stainless Steel Cabinets

Jan Laugesen 4UbSaPKGRqc Unsplash

Introduction

Cabinets are essential components that one can’t do without at home or work. They are where one gets to store various objects, including tools, supplies as well as equipment. To ensure all your items are stored safely, you need to use building material that’s durable and tough. One content that stands out is stainless steel. It’s known for its bright appeal. It’s also easy to clean and free from corrosion. It’s built to sustain high temperatures. It’s cost-effective to create your stainless-steel storage cabinet. You need the right plan, the right tools, and some time. Below is how to build stainless steel cabinets.

  1. Have the necessary tools

You need to come up with a detailed plan before you start the construction process. You must have a list of essential items. They include; steel strips, corrugated steel sheets, welder, hinges, handles, drawer glides, plumb line, drill, screws, and a measuring tape.

These items will depend on the measurements you will take. Write down the cabinet measurements as it will make your shopping easier. You can slow check on various sites including www.aluminiumwarehouse.co.uk/stainless-steel to check out the multiple stainless-steel plates, extrusions as well as bars that you will need for your construction.

  1. Draw a sketch

You need to draw a plan of how you want your cabinets to appear. Come up with a diagram and label the dimensions. A basic steel cabinet has a rectangular steel box and two doors that open outwards. There need to be shelves inside where you will stack your equipment. You can choose to add custom features such as lock for security purposes.

  1. Start construction

You ought to start by placing the cabinet’s back panel onto the ground. First, Place the two steel strips diagonally across the back of the steel sheet to form an X. fix them into place by drilling screws as well as nuts along the stainless-steel metal strips. It will offer strength as well as support to the cabinet’s backside.

Second, you need to fix the steel cabinets sides. You can weld the long edge of the side panel and back panel. It will offer a rigid join between these two edges.

Third, you must attach the steel cabinet top to the sides as well as the back. You proceed to weld the sheet as 90 degrees to create a box.

Forth, you have to weld the base to the back panel’s bottom and its sides. Later screw brackets towards the inside of the side steel panels. It will offer support to the shelves. Or you can choose to have screw drawer glides, which will hold the drawers in its place. The fitting ought to be horizontal. You can check on this by use of a plumb line.

Finally, you can attach the door using the hinges on either side of the stainless-steel cabinet. You can accessorize your steel cabinet with a lock or a door handle. At long last, you are ready to begin using your steel cabinet

Conclusion

It’s easy to come up with a stainless-steel cabinet at the comfort of your home. All you need are the right materials. You can shop for these stainless-steel bars and sheets at various sites, including aluminiumwarehouse.co.uk/stainless-steel. Thus, begin construction and have storage space.